2020 Mondraker Dusk RR Ebike
The Dusk range is similar to the Crafty, with 29” wheels, 150mm of rear travel and a 160mm fork. Where the Dusk differs is that it uses a Shimano battery and motor setup.
Is that better or worse than the Bosch? Nope, just different - in our experience the Shimano delivers power a little more steadily, rather than feeling quite so torquey as the Bosch. The Dusk also allows the use of the Shimano SMN03 extender battery - giving an astonishing 990Wh total capacity.
The top model Dusk RR features Fox 36 and DPS suspension with a Sram GX Eagle drivetrain.
Please contact us to discuss pricing and timing on Mondraker bikes. We can make swaps to the standard spec on complete bikes if required - it's always worth asking!
If you're interested in a particular size/colour then please get in touch and we can check delivery times for you.
Frame- Dusk 6061 Alloy Stealth Evo, e-Bike Optimized Zero Suspension System, 150mm travel, Forward Geometry, integrated internal non-removable battery + external, Boost 12x148mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, oversize 17mm axles, integrated dropout speed sensor.
Rear shock- Fox Float DPS Performance, 205x65mm. Settings: Compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 25x10mm bottom bushings
Shock setting- Medium compression, Medium rebound, 0.4 volume spacer
Fork- Fox 36 29 Float FIT GRIP EVOL Rhythm, 160mm, e-bike optimized, tapered steerer tube, Boost 15x110mm axle, 44mm offset. Settings: sweep adjust compression, low-speed rebound, air preload
Headset- Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°
Stem- Onoff Sulfur FG 30mm, 6061 forged alloy, 31.8mm barbore
Handlebar- OnOff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 780mm, 9° backsweep, 5° upsweep, 31.8mm barbore
Grips- Onoff Twin, 1lock-on, 135mm
Seatpost- Onoff Pija dropper internal, diameter 31.6mm, S size: 337x100mm, M size 387x125mm, L/XL size: 425x150mm
Saddle- Mondraker e-MTB custom design
Front brake- Shimano MT520, 4-piston caliper, RT66 203mm IS 6 bolts rotor, resin pads
Rear brake- Shimano MT520, 4-piston caliper, RT66 203mm IS 6 bolts rotor, resin pads
Brake lever- Shimano MT501, servo wave, alloy lever
Rim- DT Swiss H1900 Spline 29, 30mm internal width, tubeless ready, 28 spokes
Spokes- DT Hybrid SP, straight pull
Front hub- DT 370, Boost 15x110mm, IS 6 bolts
Rear hub- DT 370, Boost 12x148mm, IS 6 bolts
Front tyre- Maxxis Rekon 29x2.6 tubeless ready, Dual compound, EXO protection, 60TPI, folding bead
Rear tyre- Maxxis Rekon 29x2.6 tubeless ready, Dual compound, EXO protection, 60TPI, folding bead
Crank- Shimano E8000 drive unit, Simplo internal 630Wh integrated battery, Simplo external 360Wh battery, Shimano Steps E7000 display, crankset E8000 hollowtech 165mm
Rings- SRAM X-Sync 2 Eagle 34T, narrow-wide, Shimano 104 BCD steel
Chain- Sram SX Eagle, 12s
Rear derailleur- Sram GX, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1
Lever- Sram Trigger SX, 12s, X-Actuation 1:1, single click
Sprocket- Sram PG-1210 Eagle 11-50, 12s
Hanger- Mondraker M068
Theme by InStijl Media